Custom Discount Non Medical Glove Factory – Surgical Gloves: Can they be Re-used? – Jumbo
Custom Discount Non Medical Glove Factory – Surgical Gloves: Can they be Re-used? – Jumbo Detail:
Detail
Back in the 1980’s, hospitals around the world used to routinely wash, powder, pack and re-sterilize surgical gloves. Reusable surgical gloves were generally made thicker in order to withstand the strain of reprocessing. However, the more the gloves were re-processed, the less effective they were in preventing cross-contamination, and the less comfortable they became in comparison with recently manufactured gloves. Research has shown that there is a direct relationship between the breakdown of the latex glove barrier and the number of times worn. Although the deterioration of the gloves is not always visible to the human eye, it inevitably occurs with each use. It is risky to rely on the subjective judgment of hospital workers to decide when a surgical glove is no longer a reliable instrument. One of the main problems is that the defective glove may not be obvious to the user. Past surveys have concluded that only 50% of surgical glove punctures are noticed by the wearer. Therefore, it is obvious that the risk of infection to both health worker and patient increases based on how long the surgical glove is worn, especially if the glove is being re-used.
Modern surgical gloves are designed for conditions that are based on the most recent science. They are made out of durable material but are also very thin to ensure that surgeons have full function and sensitivity of their hands. They are also made to be as comfortable as possible to avoid any discomfort during long surgical procedures. These surgical gloves were never intended for over extended use or re-sterilization, and re-used surgical gloves should never be relied on to provide and maintain a strong and sterile barrier for safety.
Functional Benefits
* Extra strength provides additional protection from surgical debris.
* Fully anatomical design to reduce hand fatigue.
* Softness provides superior comfort and natural fit.
* Micro-roughened surface provides excellent wet and dry grip.
* Easy donning and helps prevent rolling back.
* High strength and elasticity.
Quality Standards
* Conforms to ASTM D3577 and EN 455 Standards
* Manufactured under QSR (GMP), ISO 9001:2008 & ISO 13485:2003 (Medical Device) Quality Management System
* Sterilized by Gamma Ray / EtO
* Bioburden and sterility tested
Glove sizes
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0
Product Specification
|
Type |
Gamma Ray / EtO Sterilized; Powdered |
|
Material |
Natural high quality rubber latex |
|
Design & Features |
Hand specific; curved fingers; beaded cuff; natural; textured surface; USP grade absorbable cornstarch |
|
Storage |
The gloves shall maintain their properties when stored in a dry condition at temperature not higher than 30°C. |
|
Moisture Content |
below 0.8% per glove. |
|
Shelf-life |
5 years from the date of manufacturing. |
Physical Dimensions
|
Dimension |
Standards |
||
|
iGlove Glove |
ASTM D3577 |
EN 455 |
|
|
Length(mm) |
Min 280 |
Min 245 (size 5.5) |
Min. 250 (size 5-5.5) |
|
Width(mm) • 5.5 |
71 ± 5 77 ± 5 83 ± 5 89 ± 5 95 ± 5 102 ± 5 108 ± 5 115 ± 5 |
70 ± 6 76 ± 6 83 ± 6 89 ± 6 95 ± 6 102 ± 6 108 ± 6 114 ± 6 |
72 ± 4 77 ± 5 83 ± 5 89 ± 5 95 ± 5 102 ± 6 108 ± 6 114 ± 6 |
|
Thickness – single wall (mm) |
|
|
N/A |
|
Fingers |
Min 0.10 |
Min 0.10 |
|
Physical Properties
|
Property |
ASTM D3577 |
EN 455 |
|
Elongation at break (%) Before Aging |
min 750 |
N/A |
|
Tensile Strength(MPa) Before Aging |
min 24 |
N/A |
|
Force at Break (N) Before Aging |
N/A |
Median 9 |
Product detail pictures:
Related Product Guide:
We've been convinced that with joint efforts, the enterprise between us will bring us mutual benefits. We are able to assure you product or service quality and aggressive cost for Custom Discount Non Medical Glove Factory – Surgical Gloves: Can they be Re-used? – Jumbo , The product will supply to all over the world, such as: Sydney, Oman, Los Angeles, Our company has built stable business relationships with many well-known domestic companies as well as oversea customers. With the goal of providing high quality products to customers at low cots, we've been committed to improving its capacities in research, development, manufacturing and management. We have honored to receive recognition from our customers. Till now we have now passed ISO9001 in 2005 and ISO/TS16949 in 2008. Enterprises of "quality of survival, the credibility of development" for the purpose, sincerely welcome domestic and foreign businessmen to visit to discuss cooperation.
By Bruno Cabrera from Dubai - 2017.09.30 16:36
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Dawn from New York - 2018.11.28 16:25
